Opus Technologies' Titanium MT-200 Mid-tower Chassis
by Purav Sanghani on April 23, 2004 3:06 PM EST- Posted in
- Cases/Cooling/PSUs
| Quick Look | |
| Opus Technologies MT-200 | The Good |
 Click to enlarge. |
+ 1.0mm SECC Chassis + Titanium-plated side and top panels + Front access Audio, USB, Firewire (optional) + Six exposed 5-1/4" drive bays + Five 3-1/2" drive bays (2 exposed) + Removable motherboard tray |
| The Bad | |
| - No case fans included - Some sharp edges - No sliding motherboard tray |
|
Opus Technologies, a branch of the Taiwan-based Avance Technologies, has been around since 1999. Due to the success of their high-end cases as well as their heatsinks in European and Asian markets, they recently made their way into the American case arena by introducing their line of desktop chassis and are in the process of creating a niche in the market in the US.
Opus Technologies sent us recently a sample of one of their new products, the MT-200, a titanium-plated mid-tower case that has almost all of the features as the Thermaltake VM3000 Skull series does. Opus Technologies has made this chassis their own by slapping on a few visual alterations to make it stand apart from the rest in the industry.
Take a look at the features and functionality that the MT-200 has to offer and see how it performed in our heat and sound benchmarks.
More information on the MT-200 at Opus Technologies' website.
Facebook
Twitter
RSS
10 Comments
View All Comments
appu - Tuesday, April 27, 2004 - link
"Since the MT-200 did not come with any case fans, we decided it would be best to install third party fans to simulate a typical system. We installed four 80mm fans, just as many as the Thermaltake VM3000 Skull series had. Though an optional 120mm fan can be mounted at the front of the chassis as an intake, we thought it would be best to test the case in the same state that the VM3000 was tested, since they are basically the same chassis."While the reasoning above was fine as far as
bechmarking is concerned (where variables have to
be kept to a minimum), it would've been great to
look at temp. and noise figures with that 120 mm
fan also plonked in. After all, one also has to
test the strengths of individual systems and not
just their performance across a level playing
field. It's a bit like testing a CPU's overclocked
performance after getting stock speed readings.
My two cents.
KristopherKubicki - Saturday, April 24, 2004 - link
Yeah its just some titanium alloy over the skin of the unit. i think it looks nice, but you have to see it up closee i suppose.Kristopher
Zepper - Saturday, April 24, 2004 - link
I doubt there is any real titanium in that case - just a relatively close color match. The basic chassis is sold under many names including: Athenatech, A-GPB, Enermax (the few of their Ti finish units I can find are going for ~$100 each), Key Power, Bow Technology and now Opus. Even Fry's/Outpost sells a custom version - one of the best looking of the bunch, IMO. And you really can't beat the internal design.. I particularly like the version with 4 5" bays at the top and another 3 5" bays in the bottom. You can install two 5-drive, hot-swap cages in there with room left for 1 optical and 2 more stand-alone HDs. Not to mention plenty of room for the largest ATX mobos. Helluva cheap server box!
.bh.
AtaStrumf - Saturday, April 24, 2004 - link
Looks like someone beat this thing with the ugly stick.roostercrows - Saturday, April 24, 2004 - link
"titanium is softer than steel"."it also can't be polished"what unknown alloy of steel compared to what micron thin titanium coating on what unknown alloy of steel? all steels are alloys. using what test? Knoop Microhardness, Vickers Microhardness, Rockwell C Hardness, Rockwell 15N, 30N or 45N Superficial Hardness? it's important to know what you are comparing before you opine and even then it's tricky. mild steel is 20-25 HRc, tool steel is 44-57, chrome is 65-68, carbide is 72-81 and titanium nitride is 84-88, diamond is about 98. in theory and just for fun let's compare the edge of a "kill bill" samouri sword at about 58-60 Rockwell "C" (some chinese sword have 62-64) to a TIN (titanium nitride)sword. Uma would be dead and we don't want that. no "kill bill" three?
also, it's easy to put a very high polish on even annealed pure titanium with a Rockwell "C" of 11. i would love to find a case made completely of titanium alloy and aluminum alloy, just to have one as i use water cooling and i don't need the case to radiate much heat. plating or polishing makes less heat get radiated away, like chrome plating the fins of an air cooled motorcycle. it makes it run hotter not cooler.
i also like the 3.5" I/O module
Operandi - Friday, April 23, 2004 - link
true, using Ti dosn't make much sense, unless it really looks that much differant then steel or Al.Other then that it looks like a pretty sweet case.
Odeen - Friday, April 23, 2004 - link
Guys... Titanium is NOT a good material to be anywhere on a computer enclosure. While it IS far more rust-proof (A coat of oxide forms on titanium as soon as it is exposed to air, and stays there to prevent further corrosion) than steel, titanium fails as a computer enclosure.Titanium is softer than steel - it scratches far more easily. It also can't be polished. What's worse, titanium does not transfer heat as "readily" as steel. While this is a great trait for a watch (a titanium watch doesn't feel as cold against your wrist as a steel watch when you first put it on), you WANT the case to radiate as much heat as possible. Hence, aluminum cases do a little better than steel, and acrylic cases suck for thermal management.
Still, neato case. I like the 3.5" front I/O module, I could use one for another black case I might have :)
KristopherKubicki - Friday, April 23, 2004 - link
Dont worry, the next one is worth the wait...nastyemu25 - Friday, April 23, 2004 - link
what's up with the ass-ugly case trendaraczynski - Friday, April 23, 2004 - link
when i saw the innards, my mind visualized "packard bell" <shudder>